Download Article

Download Article

Concrete walls accept become more and more popular over the last decade for their durability and modern look. Because of their durability, though, it can be difficult to hang pictures on them. Thankfully, at that place are several different ways you can get those pictures up on the wall. For objects that weigh more than 8 pounds (3.half-dozen kg), utilize a drill and anchor. For objects that weigh less than viii pounds (3.6 kg), utilise adhesive strips. With a little fourth dimension and patience, you tin deeply hang pictures from your attractive concrete walls!

  1. one

    Marker the positions for the holes for your picture on the concrete wall. Depending on how large your pic is, you may need 1, 2, or even 3 holes to back up it. Mostly, you can measure out the length of the motion picture and plan to brand i hole at the middle bespeak. If you're going to use more than than 1 hole, infinite them out evenly along the length of the pic.[ane]

    • For pictures that weigh less than 50 pounds (23 kg), 1 hole should provide enough support. If it weighs more than that, consider using two or 3 holes.
    • Also consider the length of the picture. For extremely wide pieces, you may want 2 or iii holes merely to ensure that the photo won't hands go crooked.
    • If yous do cull to make more than one hole, use a level to ensure they're at equal heights on the wall. If they aren't, your film will hang kleptomaniacal.

  2. 2

    Gear up the stop-bar on your hammer drill at the appropriate depth. Check the length of the threaded anchor you're going to utilise. That length is the minimum depth that your hole needs to be. Avoid setting the stop-bar much further than that point to avoid unnecessary drilling.[2]

    • If your drill doesn't accept a terminate-bar, you tin can apply a piece of masking record to mark the stopping bespeak on the actual masonry bit.
    • Hammer drills are the best choice for drilling into concrete. They combine the pounding of a hammer and the rotation of a drill to brand the drilling a bit easier. If you don't have one or can't rent 1, a rotary drill volition also piece of work.

    Advertisement

  3. iii

    Concur the drill in both hands and place your anxiety shoulder-width apart. The proper stance is really important to your safety and to accurately drilling that pigsty into the physical wall. You need to be able to drill straight into the wall rather than at an angle. Besides put on protective eyewear before you actually showtime drilling to protect your eyes from concrete bits and dust.[3]

    • If the spot for the hole is too loftier for you to reach without having the drill at an angle, apply a pace-stool or ladder. Just exist certain to exist rubber and take someone agree the ladder for y'all if you need some extra stability.
    • Even if y'all habiliment glasses, yous withal need to put on safety goggles. Dust and concrete could fly around the rim of your glasses and injure your eyes.

  4. 4

    Create an 1⁄8 to i⁄4  in (0.32 to 0.64 cm) deep guide pigsty. Utilise your masonry bit on the lowest speed setting to create the guide hole before yous actually make the rest of the hole. This volition help perforate that hard concrete outside and volition make the residue of the drilling easier.[iv]

    • The low speed will actually give you a niggling more control to get your hole started without potentially damaging your drill flake.

  5. 5

    Turn up the ability and make your hole in the concrete wall. Using the same masonry bit, choose the highest drill setting (most drills only have 2 or iii settings), and push direct into the guide hole. Try to keep the drill as fifty-fifty as possible so it doesn't go in at an angle. Apply slow, steady movements, and go along pushing the drill forward until you hit the end-depth mark.[5]

    • If you need to, stop along the way to blow away backlog grit.

  6. 6

    Intermission upward obstructions in the pigsty with a hammer and masonry nail. This may non exist an consequence, merely if you see any really difficult obstructions, like a rock or stone, that you can't push through with regular strength, finish drilling. Take a long masonry smash and your hammer, and scrap away at the blockage until it is broken up into smaller pieces. Then you tin can resume drilling.[vi]

    • Y'all probably won't run across this result if you're dealing with a newer wall. For older concrete walls from 50 or and so years agone, though, you lot might accept more blockages come up.
    • Trying to force the drill could actually damage the masonry chip.

  7. 7

    Fit a threaded anchor and screw into the pigsty. If you lot notice any dust or grit, blow into the hole first or use a can of compressed air to articulate information technology out. Yous may need to lightly hammer the ballast to get it fully into the hole, which is okay. Insert the screw by hand, or employ a cordless drill to get it into place.[vii]

    • The threaded anchor is super important for securely hanging pictures on the wall—information technology will go on the screw in identify and prevent it from slipping out from the weight of the motion-picture show.

  8. 8

    Hang upwardly your picture and check that information technology'southward level. One time the threaded anchor and screw are in place, you're ready to get that picture up on the wall! Hang information technology up, and then use a level to make certain it's even all the style beyond. Reposition as needed, and enjoy![8]

    • In all, it should merely have you several minutes to drill into a concrete wall and hang upwards your motion picture.
    • Don't forget to vacuum up the physical balance from the basis.

    9. Advertisement

  1. 1

    Purchase agglutinative strips that can support the weight of your picture. Luckily, most pictures don't weigh a ton unless they're inside a actually heavy frame. Bank check out your local hardware store to purchase strips that are the advisable size for the thing you need to hang; the weight limit volition be clearly posted on the package.[9]

    • These strips are made specifically for hanging pictures or like objects from the wall. Normal double-sided tape won't work for this purposes.
    • Nearly adhesive strips tin can't agree objects that weight more than than 8 pounds (3.6 kg). Yous'd be best off drilling a hole into the concrete and using ballast hooks if your film weighs more than that.

  2. ii

    Clean the surface surface area of the wall with rubbing booze. Decide where you want to hang your picture, and make clean the areas that will have the strips on them. This will help the agglutinative attach to the wall more securely. Employ rubbing alcohol and a clean, lint-free towel or cotton balls.[ten]

    • If the frame you're using is muddied or dusty, clean the back edges of information technology, besides, so that the agglutinative will stick to information technology better.

  3. three

    Secure the agglutinative strips to each corner on the back of the frame. Each brand of adhesive strips has its own instructions, so make sure to read the package to make sure you're doing it correctly. For many brands, there volition be two parts: 1 will be attached to the back of the frame and 1 will stick on the wall. To go along things lined upwards, become ahead and "click" together the two pieces, and and then attach them to the back of the frame.[11]

    • A strip at each corner of the frame will aid the picture stay in place securely, though y'all could add more beyond the tiptop of the frame if y'all prefer.
    • The size of the actual strip doesn't affair, as long as it isn't visible from backside the frame. Just call back to pick a strip that can support the weight of the picture you're wanting to hang.

  4. iv

    Position the motion-picture show on the wall and press it downwardly for 30 seconds. Remove the liner from the dorsum of each strip so the adhesive is exposed. Then employ a level to position the picture to ensure it is directly all the fashion beyond. Once you know it's level, go alee and printing the picture onto the wall and lean confronting it for xxx to 60 seconds to get-go the adhesive process.[12]

    • Information technology's actually of import that yous follow the time directions, then if you tend to count quickly, count to 60 seconds instead of 30. Or, use a timer on your phone.

  5. 5

    Lift the frame from the bottom and so the fasteners come undone. Later the initial pressing, grip the bottom of the frame and pull it back toward you then that the strips disassemble from each other. The detaching will remind you of velcro coming undone.[13]

    • Once the frame is back off the wall, there volition be strips stuck to the wall as well as to the back of the frame.

  6. 6

    Printing each strip down for 30 seconds, both on the wall and the frame. Every strip on the wall and every strip on the frame should receive an additional 30 seconds of pressure to secure information technology in place. Set your timer or count out loud slowly to give each strip the time it needs.[14]

    • Again, virtually agglutinative strips accept similar instructions, but if your packet specifies annihilation different, follow those directions.

  7. 7

    Set a timer for ane hr and let the adhesive adhere to the wall. Before putting the picture show back on the wall, the strips need more than fourth dimension to cement themselves in place. If y'all leave them for longer than 1 60 minutes that is okay, likewise.[15]

  8. 8

    Remount the film past aligning the strips and clicking them in identify. After the 1 hour of time has passed, it's time to put your photo on the wall! This should be equally simple as lining up the strips on the back of the moving picture to the ones on the wall, and pressing them together until you hear them "click" back into place.[16]

    • A lot of strips come with tabs you tin pull to safely remove them from the wall without leaving agglutinative behind. If y'all demand to permanently remove your motion picture, use these tabs to get the strips off of the wall.

    9. Advertisement

Add New Question

  • Question

    Do you need a drill to hang things on a concrete wall?

    Peter Salerno

    Peter Salerno is the possessor of Claw it Up Installation, a professional installation company, which has been hanging art and other objects effectually Chicago, Illinois for over 10 years. Peter likewise has over 20 years of experience installing fine art and other mountable objects in residential, commercial, healthcare and hospitality contexts.

    Peter Salerno

    Installation Expert

    Expert Answer

    For the best results, use a hammer drill with a carbide percussive physical flake. If you lot use a standard drill bit, it's going to intermission.

Ask a Question

200 characters left

Include your email accost to get a message when this question is answered.

Submit

Ad

  • There are tool-rental shops where you can rent a piece of equipment for a set period of time, which can be really helpful if you don't ain or desire to buy a pricey drill.[17]

  • Concrete is slightly different from cement. Cement is technically an ingredient mixed with h2o and other things, similar sand and gravel, to form physical.

Advertisement

  • Always utilise protective eyewear when you're working with a drill and physical. Little $.25 of concrete could fly into your eyes, causing irritation and injury.

Advert

Things Y'all'll Demand

  • Pencil or marker
  • Ruler
  • Hammer drill
  • Goggles
  • Tungsten carbide masonry bits
  • Masonry nail
  • Hammer
  • Threaded anchor(s)
  • Screw(southward)
  • Level
  • Adhesive strips
  • Cotton fiber balls or lint-free towel
  • Rubbing alcohol
  • Level

References

About This Article

Cheers to all authors for creating a page that has been read 18,611 times.

Did this commodity assist y'all?